产品运用与优点

(Product application and advantages )

产品适用于工作站，工业控制器，电力供应，路由器，以及交换机等。

(Products are suitable for Workstations, Industrial Controllers，Power Supplies ，Routers and Switches etc. )

这不是该产品的应用程序的最终列表。它代表了一些比较常见的用途。

This is not a definitive list of applications for this product. It represents some of the more common uses.

产品优点有如下几点 (The advantages of the product are as follows)

         1.1 EdgeRate触点优化了信号完整性性能 

   Edge Rate contacts optimized for signal integrity performance

        1.2 1.5毫米接触摩擦距离

      1.5 mm contact wipe

       1.3 高达56 Gbps的PAM4性能

   Up to 56 Gbps PAM4 performance

     1.4 堆叠高度从7毫米到18毫米

   Stack heights from 7 mm to 18 mm

    1.5 支持持高速协议包括以太网和PCI Express®

     Supports high-speed protocols including Ethernet and PCI Express®

封装PCBLayout

SI性能 (SI performance)

本测试报告描述了OUPIIN Edge Rate 连接器的SI测试环境及测试结果，主要包括连接器的阻抗、插损与回损、近端串扰、远端串扰等电气性能指标。

This report describes the OUPIIN High Speed Board to Board connector SI characteristic, including test environment ,test results ect. The report reflects the connector impedance, insertion loss and return loss, crosstalk and other electrical properties of proximal.

 测试环境(Test Environment)

  1、测试仪器(Test Instrument)

VNA：ROHDE&SCHWARZ ZVA50 (4-Port) Vector Network Analyzer 10MHz~50GHz

TDR：ROHDE&SCHWARZ ZVAB-K2 Time domain(software license)

Test Board：2386 connector test board

2、测试系统描述(Test board description)

Use Panasonic Megtron-6 material

Pin definition:

High Speed Board to Board (P/N)

总结(Summary )

Oupiing 的EdgeRate 接触系统专为高速，高循环应用而设计。 EdgeRate触点的表面经过铣削处理，形成平滑的配合表面区域，而不是与切割边缘配合的冲压触点。 这种光滑的配合表面减少了触点上的磨损痕迹，增加了触点系统的耐用性和循环寿命。 它还降低了插入和拔出力。

Samtec’s Edge Rate contact system is designed for high speed, high cycle applications. The surface of the Edge Rate® contact is milled creating a smooth mating surface area instead of a stamped contact that mates on a cut edge. This smooth mating surface reduces the wear tracks on the contact increasing the durability and cycle life of the contact system. It also lowers insertion and withdrawal forces .